Camouflage

Camouflage by its very nature is intended for animals to help avoid detection by predators or prey. There are a number of methods of doing so. One is for the animal to blend in with its surroundings, another is for the animal to disguise itself as something uninteresting or something dangerous.

mwgsam41

-

Flashlight

The C3 Centurion utilizes an ergonomic flat-side CombatGrip design and a patented rubber grip ring so that the light can be operated with a handgun using the Rogers/SureFire technique. Powered by three lithium batteries (10-year shelf life), the C3 Centurion® produces 105 lumens output for 60 minutes, or 200 lumens (up to 13 times brighter than a two D-cell flashlight) for 20 minutes using an optional ultra high output lamp. The C3 is precision-machined from aerospace-grade aluminum with an anti-roll bezel and is available in either a Type II anodized black finish, or a super rugged military specification Type III hard anodized finish. A lock-out tailcap allows the light to be locked in the OFF position to prevent accidental discharge of light during tactical operations, transportation, or storage, The C3 also features unique switching originally developed for law enforcement- twist for constant on, or depress the tailcap button for momentary flashlight illumination or emergency signaling. The C3 Centurion is perfect for the law enforcement officer or civilian shooter who needs a higher output CombatLight® for longer range engagements and increased shock power.

yesbjrd60

Harris Bipod

Harris Bipod Model 1A2-25 12″- to 25″ Solid Mount Black
Versatile, sturdy, light and fast. Made from high strength anodized aluminum alloy. Stressed parts are tempered spring steel. Bipods clamp to most Q.D. stud-equipped bolt action rifles and have sling attachment provision and adjustment foroff-center stud. Spring loaded folding legs are quickly adjustable for height. Black anodized finish.

mwgsam59

-

ESPN.com - DALLAS — Lone Star Outdoor News has learned that American Airlines has backed off its Sept. 24 policy restricting the transport of firearms on flights to and from Europe and Asia. In a statement provided to Lone Star Outdoor News on Sept. 26 Click Here..

Medford Mail Tribune - All the facts accumulated by police, the FBI, Bureau of Alcohol, Tobacco and Firearms and the Justice Department over a seven-year period show this scenario to be complete nonsense. Yet, these anti-American talk-radio clowns deliberately broadcast a Click Here..

Hartford Courant - Troopers revealed very few details about the case, but said the two men were involved in more than 230 illegal sales of firearms, including pistols, rifles and assault weapons. William J. Newell Jr., 36, and Thomas J. Yetke, 33, were arrested late Click Here..

Ottawa Citizen - Sahal was killed, the Ottawa police promised a renewed crackdown on street gangs and illegal firearms with the formation of a guns and gangs unit. Sentencings are scheduled for Oct. 5 to allow Mr. Sahal’s family time to prepare their victim impact Click Here..

Forbes - This necessary law emphasized the Ohio General Assembly’s intent to enact a general law “to provide uniform laws throughout the state regulating firearms, their components and their ammunition.” By enacting comprehensive state legislation, local Click Here..

Gun Magazines

The weight of the barrel will only refer to whether the barrel is a “heavy” one or not. The heavy-barrel (HB) designation means that there is more metal there. Some of these taper at different points, either underneath the handguards or from the front sight on. The HB whose thickness does not vary (i.e. is maintained from back to front) offers the most durable design. The 16″ barrels are available in a lightweight configuration, M4 profile (thin under handguards, thick outside handguards, and with a cutout to allow mounting of M203, and in a heavy barrel. For this rifle, a lightweight or M4 Gun Magazines profile offers the most advantages as far as weight and handling.

mwgsam15

-

Dove Hunters Greeted With Pleasant Surprise

Landowners Will Work With Hunters

Mounting Solutions Plus, Scope Mounts & Rings: AR-15 / M16, AR15
A distributor of Scope Mounts & rings and other quality gun accessories and shooting supplies.

Golden State Lead Ammunition Ban Sent to Governor’s Desk!

U. S. Forest Service Takes Steps To Protect Recreational Shooting

cz 52 grips

SPF This is a custom fully hardchromed CZ52 in 7.62×25. Comes with two factory mags, cleaning rod, and factory leather holster with ink stamps intact inside flap. Plating done by Classic Arms. Pistol has been shot 25 times. Excellent condition. $225 shipped to your FFL.cz 52

mspasfeh023

-

AR-15 Gun Supplies

Ok, lets cover the necessary tools. What you need:

Since this procedure requires removal of the barrel/barrel nut, you will need many of the same tools as listed in the Step by step guide to building a complete upper, above.

See the above post… but to sum it up, you will need a good action block, armorers AR-15, 1/16″ punch, snap ring pliers, moly-grease, and a vise.

You will also need a couple punches. You just need a good sized (1/4″) soft brass punch and a steel 1/8″ punch.

(allen wrench and blue loctite supplied with tube!)

That s it for tools! Now here are the step-by-step instructions:

1. Remove the upper from the rifle. Remove the handguards. Remove the muzzle device. Remove the front sight base. Unscrew the factory barrel nut and remove the nut, and delta ring assembly (we wont be needing these)

To mount a LaRue tube, the “keeper” (anti-roll device) plate will interfere with the action block I was using. It required I take a dremel and cut out a notch to accomodate this. I am not sure if it was required…. I cannot tell if this can be slipped in after the fact…. YMMV.

mspmwg53

Ruger 10/22

The benefits of the Ruger 10/22 are many, and vary by model. The standard 10/22 Carbine, virtually unchanged since introduced in 1964, is the most popular .22 rifle of the last 40 years; the Ruger Deluxe Sporter features a cut-checkered walnut stock with a flat buttplate; the Ruger All-Weather 10/22 features a stainless barrel, clear anodized rust-resistant aluminum alloy components, and a durable synthetic stock;

mspasfeh055

-

AR-15

In the Bushmaster Carbon AR-15 line, the Type 97 Pistol includes the top of the line features that will stand out at any range. With a space-age look and high tech design, this 46 ounce feather-weight is a real blast to shoot. The Upper and Lower Receivers are molded of state of the art Carbon Fiber 15 material that offers incredible durability, strength and ultra-light weight. The pistol’s fluted, stainless steel, match grade barrel is chambered for the 5.56mm NATO Cartridge and readily accepts the .223 Remington cartridge as well. Barrel fluting - eight deep lengthwise grooves - offer increased cooling and further reduces total weight.

mspasfeh059

-

Beretta

The G model was developed for a specific counter-terrorist unit in Europe who didn’t want to accidentally activate the 92FS’s safety at the wrong moment….thus the G model was created to preclude the possibility of accidentally engaging the safety by eliminating the lever’s function as a safety entirely.

As far as worth, if the weapons are in good ruger p 89 shape and they are in your price range, go ahead and buy one. Berettas get a lot of static, but in reality they are pretty good handguns with a good overall service record, especially in Colt 1903 grip.

If they are police turn-ins, I would expect them to sell for between 250 and 350 bucks depending on the condition of the finish.

I own 2 Beretta 92s, a 92 FS and a first generation 92 Elite. They have been very reliable pistols for me in all the years I have owned a colt officer model:

mspasfeh005

-

colt model 1911

I want to make something happen. I always try to be fair in my dealing. I understand FN is no longer going to import the Colt 1908 ; take that for what it’s worth in the effect on 380 colt government mustang .

Well I think I lost it. I offered to buy a 1911 colt development government model model sight unseen the other day. The price seemed right so what the hell. Well the gentleman showed up with it and I bought it. I have to say I’m not a fan of nickle plating but it’s growing on me.
I can’t figure out the barrel set up. The barrel sticks out the front a half inch? It looks like a bull barrel with no bushing. The guide rod is a full length onecolt officer model

mspasfeh016

-